Simple settings in CS 2 are of interest to many players and ordinary fans of eSports. After the transition to the Source 2 engine, new settings were added to the game, and some of the old console commands were changed or completely removed, which significantly influenced the new config and the general set of parameters. Anyone can make settings like s1mple in KS 2, because all the necessary data is publicly available.
In this guide, we will look at what settings Simple has in CS 2. Read on and find out all the individual gaming parameters of one of the best Counter-Strike 2 esports players.
In a separate guide, they talked about all useful binds in CS 2.
What kind of PC does Simple have?
Computer hardware plays an important role in e-sports - we list what characteristics the Simple PC has:
- Processor – AMD Ryzen 9 5950X.
- Maternal pay – Asus ROG Crosshair VIII Dark Hero.
- Video card – Sapphire NITRO+ Radeon RX 6900 XT.
- RAM – G.Skill DDR4 64GB (2x32GB) 4000Mhz.
- SSD storage device – Samsung 980 PRO 1000 GB M.2 MZ-V8P1T0BW.
- Block Power – ASUS ROG THOR 1200P.
- Chassis – ASUS ROG Strix Helios GX601.
- Охлаждение – Thermaltake Pacific M360 Plus.
- Monitor – ZOWIE XL2566K (1280×960 4:3 Stretched 360 Hz).
- Headphones – Logitech G PRO X HEADSET.
- Keyboard – Logitech G915 TKL.
- Mouse – Logitech G Pro X Superlight White.
- Mat – Logitech G Powerplay.
- Webcam - Logitech C920.
- gaming chair – Anda Seat x NAVI.
Please note that this data is from 2022 years, and s1mple’s official partners supply it with new components every few months. As a result, not everyone can build a PC like Simple’s, but the listed characteristics are what you should strive for.
What are the settings for Simple in CS 2?
Almost all of s1mple’s settings for CS 2 are publicly available, so every gamer can try playing with the parameters of the legendary cybersportsman. Before setting it up, you should take into account the configuration of your computer - the Simple PC has excellent characteristics.
In a separate guide, they talked about best graphics settings in Counter-Strike 2.
Launch parameters
All parameters for launching CS 2 from Simple can be summarized in one line - these settings should be entered before starting the game through the properties of CS 2 in the Steam library:
-freq 240 -novid -console +fps_max 0
Let's decipher each parameter separately:
- «-freq 240» – change the screen refresh rate.
- «-novid» – disable the additional video when loading the game.
- «-console» – enable the developer console.
- «+fps_max 0» – disable FPS restrictions.
In a separate guide, they talked about all ways to display FPS in CS 2.
Graphics settings
To make graphics settings in CS 2 like Simple, you need to go to the “Graphics":
- Brightness – from 100% to 140%.
- Screen format – normal, 4:3.
- Resolution - 1280x960.
- Display mode - in full screen.
- Update frequency – 360 Hz.
Let's list the additional settings for Simple graphics, which can be found in the "Advanced Picture Settings":
- Increased player contrast - off.
- Vertical sync - off.
- Anti-aliasing mode — 8x MSAA;
- Overall quality of shadows - high;
- Detailing models and textures - low;
- Texture filter mode - bilinear;
- Shader detail - low;
- Particle Detail - low;
- Global shading - average;
- High dynamic range - quality;
- Flexibility FX Super Resolution - off (highest quality);
- Low latency NVIDIA Reflex - off.
Please note that Simple's graphics in KS 2 are tied to its video card - a graphics adapter from another manufacturer may change the list of available parameters.
Mouse settings
The s1mple mouse settings in CS 2 can be copied using two console commands - the rest were removed from the game after the transition to Source 2:
m_pitch "0.022"; m_yaw "0.022";
Gaming computer mice have fine-tuned settings for many parameters - let’s describe how the s1mple mouse is configured:
- DPI: 400.
- ePDI: 1236.
- Sensitivity: 3.09.
- HZ: 1000.
- Proximity sensitivity: 1.00.
- Sensitivity in Windows: 6.
- Mouse acceleration: 0.
- Function Raw input: 1.
The specified settings for the Simple mouse correspond to a specific model, so any other mouse may have fewer customizable parameters.
How to make Simple hands in CS 2
You can make Simple hands in CS 2 only using a set of console commands:
Viewmodel_fov 68; Viewmodel_offset_x 2.5; Viewmodel_offset_y 0; Viewmodel_offset_z -1.5; Viewmodel_presetpos 3;
The placement of Simple's hands in CS may visually differ slightly from what it was in CS:GO - the reason is that after the transition to the Source 2 engine, some of the console commands for settings were removed.
Simple sight settings in CS 2
The easiest way to make a Simple sight in CS 2 is to import a special cipher through the settings menu:
- "CSGO-kuMHT-6DB3P-HnHrB-UvD6i-XNh8E" – new Simple sight (2023).
- "CSGO-BsGNr-FrPOP-xKVBB-vwRXz-iKH8D" – old s1mple sight (2022).
Use the Simple sight code, and all parameters from the settings will automatically be set to the desired value.
Simple's sight through the console
You can customize the s1mple sight through the console developer - to do this you need to enter the following commands sequentially:
cl_crosshairalpha 255; cl_crosshaircolor 5; cl_crosshairdot 1; cl_crosshairgap -2; cl_crosshairsize 1;
cl_crosshairstyle 5; cl_crosshairusealpha 1; cl_crosshairthickness 0; cl_crosshair_drawoutline 0;
cl_crosshair_sniper_width 1; cl_crosshaircolor_r 0; cl_crosshaircolor_g 255; cl_crosshaircolor_b 170;
From time to time, Simple slightly changes its current crosshair settings, such as color or size, but often returns to its original settings. The above set of parameters can be used as template for your sight.
How to install Simple radar in CS 2
S1mple uses small-scale radar, which allows you to immediately assess the situation on the entire map. In order not to get confused in the visual information, you have to link the radar axis to your position. Below we list all the console commands that will help you make a radar like Simple in CS 2:
- «cl_hud_radar_scale 0.83» – change in the overall size of the radar.
- «cl_radar_always_centered 1» – linking the center to the player’s position.
- «cl_radar_icon_scale_min 0.6" – resize player icons.
- «cl_radar_rotate 1» – disables radar rotation.
- «cl_radar_scale 0.450000» – change the radar scale.
To temporarily zoom in on the radar area, you can do special build – even esports athletes use it.
Simple hud settings in CS 2
There are not many actual commands left for setting up the HUD, but with their help you can try to make an interface like Simple in KS 2:
cl_hud_color 3; hud_scaling 1; hud_showtargetid 1;
These commands will change the color and size of the hood.
In a separate guide, they told in more detail, how to customize the visual interface in CS 2.
Config of Simple in CS 2
The current Simple config for CS 2 can be downloaded to it personal official page.
In a separate article, which described about placing grenades, provided detailed instructions, how to install and use the config in CS 2.
Download s1mple config from third-party sites not recommended – the archive may contain viruses or incorrect config that has nothing to do with the e-sportsman.
Read on:We hope that the prepared material helped you find out what settings s1mple has in CS 2. If you have any questions, you can write them in comments. Read on our website in a special section other useful Counter-Strike 2 guides.
this sight is just imbecile
imba